BrauKon AlloySius

Homogeneous, gentle mashing-in

BrauKon AlloySius generates due to the specific guidance of the grist and water a dynamic mixing zone. Thereby, a homogeneous mash is created during the mashing-in process. Even at highest throughput levels and with thick mashes, AlloySius operates completely dust and lump-free.

Increased yields with minimum lautering times

The proven pre-mash system AlloySius increases yields, shortens mashing work and leads to a lower iodine index. The dynamic mixing system prevents the accumulation of grist and reduces the energy requirements for mixing. Thus, the husks are protected and the lautering times are signifi cantly shorter. The entire mashing process can be observed through the aesthetic sight glass. The BrauKon AlloySius is completely CIP compatible.

Shorter lautering times and increased yields

BrauKon AlloySius

All facts at a glance

  • Benefits

    Benefits

    • Dust and lump-free mashing-in
    • Increased yields
    • Shortened mashing work
    • Lower iodine index
    • Shorter lautering times due to the protection of husks
    • Fully automatic CIP cleaning
    • Reduced energy requirements for agitation
    • Highest grist throughput and turbulent mixing achieved with the Venturi principle
    • Upgradable
    • No moving parts
    • The mashing process is checked through an aesthetic sight glass
    • Homogeneous mash allows for direct mixing on a pump: mashing-in from below is possible
  • Procedure

    Mashing-in

    During mashing-in, the grist sinks to the bottom, is split up by the cone in a circular direction and then comes into contact with a turbulent closed water film. This guidance of the media guarantees a uniform mixture and prevents lumps from forming. The result is perfectly mixed mash right from the outset.

  • Models

    Models

    • Standard-sizes with sight glass and grist throughputs ranging from 100 kg/h up to over 70 t/h
    • Customized models with larger throughputs possible
  • Downloads

Benefits

  • Dust and lump-free mashing-in
  • Increased yields
  • Shortened mashing work
  • Lower iodine index
  • Shorter lautering times due to the protection of husks
  • Fully automatic CIP cleaning
  • Reduced energy requirements for agitation
  • Highest grist throughput and turbulent mixing achieved with the Venturi principle
  • Upgradable
  • No moving parts
  • The mashing process is checked through an aesthetic sight glass
  • Homogeneous mash allows for direct mixing on a pump: mashing-in from below is possible

Mashing-in

During mashing-in, the grist sinks to the bottom, is split up by the cone in a circular direction and then comes into contact with a turbulent closed water film. This guidance of the media guarantees a uniform mixture and prevents lumps from forming. The result is perfectly mixed mash right from the outset.

Models

  • Standard-sizes with sight glass and grist throughputs ranging from 100 kg/h up to over 70 t/h
  • Customized models with larger throughputs possible
Our customers have the following to say about BrauKon AlloySius

Our AlloySius hydrator improve mashing, lautering and yields - great addition to our brewhouse.

Contact us

Contact us here

Find the right contact person and receive reliable service and support for all of your needs. Experience BrauKon live at trade shows and events, or plan a trip to visit us directly at our company. We look forward to meeting you.